DPCMAN-CFG License Uploads HART® Configuration Parameter
List and Values to Host PC!
-
Works with MFC4100 (legacy model) and MFC4150/4150X
HART® Communicators or MFT4010 Calibrator/HART®
Communicator
-
Retrieves HART® configuration parameter list and
values from MFC/MFT memory and saves to PC directory
-
View in spreadsheet or report form
-
Provides electronic or hard copy documentation of HART®
device setup
-
License is for one host PC but works with unlimited
number of MFT handhelds
Meriam's DPC Manager software utility is shipped with each
MFC/MFT handheld. The free portion of DPC Manager facilitates
Internet updates of the handheld's firmware and DOF files
for specific HART® devices. Optional capability is available
via paid license for documenting HART® configurations
and calibrations results. DPCMAN-ALL allows users to upload
this data from MFC or MFT memory to the host PC, providing
an electronic record of device information. Configurations
or calibration results can be viewed thru spreadsheet applications
(.csv format) or storage as PDF files.
DPCMAN-CFG works in one direction only; from MFC/MFT memory
to the host PC.
If you have any questions please contact your local Meriam
dealer or contact the factory direct at sales@meriam.com.
|
DPCMAN-CFG
Notes:
1. Files are in Adobe Acrobat® Reader® format. Download
Acrobat Reader by clicking on the "Get Acrobat Reader"
button above. Acrobat Reader Versions 3.0 and 4.0 should be
upgraded to avoid possible difficulty in viewing the available
PDF files.
|
